Contact Us

TEL: +86-532-87237920
Fax: +86-532-87237920
E-mail: info@blowingplastics.com
Address: Site is located in the west of Taidong road and north of Xinjiang in Qingdao

Large Blow Molding Machine For Water Tanks (2000L-4 Layers)

Large Blow Molding Machine For Water Tanks (2000L-4 Layers)

The installation of blow molding die: 1,According to the blow molding machine project report,manual operation of the screw back, the mold head device move backward, so as to facilitate the mold installation. 2,The whole die is hoisted to the middle of the template. The clearance between the template and the mold is about 5mm by manual clamping, adjusting the position of the mold, manually closing the mould, making the template clamped and locking the fixed bolt.

Large Blow Molding Machine for Water Tanks (2000L-4 Layers)

Large Blow Molding Machine for Water Tanks (2000L-4 Layers).jpg

产品描述_副本1.png


The installation of blow molding die:

1,According to the blow molding machine project report,manual operation of the screw back, the mold head device move backward, so as to facilitate the mold installation.

2,The whole die is hoisted to the middle of the template. The clearance between the template and the mold is about 5mm by manual clamping, adjusting the position of the mold, manually closing the mould, making the template clamped and locking the fixed bolt.

3,Connect the mould water pipe, the oil pipe, and connect the mold mouth and the trachea.In the connection operation, attention must be paid to the sealing of blow molding machine,which helps the blow molding machine repair.

4,Manual operation of the open mode, according to the specific conditions of mold and products, will open, the die end close to the switch to the appropriate position, and will open, close to the switch close to the best position, so that the end of the die is smooth, no impact.

5,The operation screw moves backward, the machine rises and falls, and adjusts the outlet of the die head device to the best position.So there's no the blow molding machine problem.

6,Manual operation again to check the opening and closing mode, ejection and other actions. After confirming the normal operation, start the machine and run the book week automatically. Confirm the normal parking, turn off the oil pump, prepare the material trial run.  

配图.png



Hot Tags: large blow molding machine for water tanks (2000l-4 layers), manufacturer, supplier, price, for sale
Inquiry