Contact Us

TEL: +86-532-87237920
Fax: +86-532-87237920
E-mail: info@blowingplastics.com
Address: Site is located in the west of Taidong road and north of Xinjiang in Qingdao

New Design 2000L 6 Layers Water Tank Blow Molding Machine

New Design 2000L 6 Layers Water Tank Blow Molding Machine

Operation process of blow molding machine: 1,Open the cold water cooling Connect all the water pipes, turn on the total cooling water valve and return valve, check whether there is any leakage in all pipelines. Turn on the branch cooling water valve and return valve and check the leakage and water condition.In addition, check the reliability of blow molding machine spare parts carefully. 2,Open the air compressor Open the total power supply for the air compressor of the water tank blow molding machine, turn on and turn the red power switch on the air compressor on the right. After pressing the air compressor, open the switch under the gas tank and release the sewage.

New design 2000L 6 layers water tank Blow Molding Machine

2000L主图_6 layer.jpg

产品描述_副本1.png

Operation process of blow molding machine:

1,Open the cold water cooling

Connect all the water pipes, turn on the total cooling water valve and return valve, check whether there is any leakage in all pipelines. Turn on the branch cooling water valve and return valve and check the leakage and water condition.In addition, check the reliability of blow molding machine spare parts carefully.

2,Open the air compressor

Open the total power supply for the air compressor of the water tank blow molding machine, turn on and turn the red power switch on the air compressor on the right. After pressing the air compressor, open the switch under the gas tank and release the sewage.                                   

3,Feeding

Mix the new material and the returned material in a certain proportion, stir in the blender for 3-5 minutes, pour the stirring material into the bin and cover the barrel.This step is a new design for 2000L 6 layers blow molding machine.

4,During the operation of the reciprocating blow molding machine, abnormal conditions should be found. It should be stopped immediately to check, and then restart after troubleshooting.

5,When the machine is disused, rust proof paint should be applied to the painless part and the mold cavity, so it is better to unload the mold.

6,Shut down the oil pump, air compressor and heating ring when cutting down, and cut off all the power supply.

配图.png













Hot Tags: new design 2000l 6 layers water tank blow molding machine, manufacturer, supplier, price, for sale
Inquiry